Features:

  • Ultra-Durable Quartz Element

    Translucent fused quartz houses a thick steel coil to create a high-output, durable element that emits a soft red glow

  • Parabolic Specular Reflector (PSR)

    A mirror-finish anodized rear reflector directs lost infrared energy back towards the target, maximizing performance and efficiency

  • Ultra-Durable Design

    Stainless steel construction ensures reliable heating for years to come

  • Precise Directional Heating

    Accurately alter coverage through simple bracket adjustment

  • Wireless Control Capabilities

    Genuine wireless control accessories allow seamless integration of remote heating output adjustment

Specifications

Model 2000W3000W4000W6000W
Energy Type ElectricElectricElectricElectric
Heat Output 2000W3000W4000W6000W
Heat Area Up to 6m2 / 65ft2Up to 9m2 / 100ft2 Up to 12m2 / 130ft2Up to 15m2/ 160ft2
Power Connection 240V / 270V terminal block240V / 270V terminal block240V / 270V terminal block
Minimum Mounting Height Ceiling Mounting - 2400mm / 7'10" Wall Mounting - 1800mm / 5'10"
Minimum Distance to Combustible Materials Short Side: 300mm / 12" Long Side: 300mm / 12"Short Side: 300mm / 12" Long Side: 450mm / 18"
Weight Weight
Metric Dimensions 1117mm x 86mm x 214mm1410mm x 86mm x 214mm 1117mm x 86mm x 214mm1410mm x 86mm x 214mm
Imperial Dimensions 44" x 3.5" x 8.5"56" x 3.5" x 8.5" 44" x 3.5" x 8.5"56" x 3.5" x 8.5"

Accessories:

Mounting Solutions

Bromic Heater Recess Kits

Bromic’s Electric Heater Recess Kits enable seamless integration of heating solutions into areas where subtlety and style are paramount. Platinum and Tungsten Smart-Heat™ electric units each have unique recess kits, allowing them to service spaces with ceilings between 2.4m/7’10” and 3.5m/11’6” above the floor by flush-mounting units within roof cavities as small as 250mm/10”!

Bromic Heater Tube Suspension Kits

Bromic’s Electric Heater Tube Suspension Kits are used to space units down to an effective height in higher ceiling applications where wall-mounting may not be appropriate. Using two 1m/3’3” poles that can be cut to length to evenly suspend a heater, these kits retain directional adjustability while providing heat directly to targets from above.
 

Wireless Control Solutions

Bromic Heating Wireless Controller

The Bromic Heating Wireless Controller has the ability to switch power supply to two separate circuits, enabling independent ‘On/Off’ control of up to two electric or four gas heaters. The unit’s included radio transmitter offers control from up to 30m or 100ft away and is entirely portable, although it can be easily mounted with a double-sided adhesive or with screw provisions within the case.

Bromic Heating Wireless Dimmer Controller

The Bromic Heating Wireless Dimmer Controller augments the functionality of our base-model Wireless Controller with the ability to dim electric heating output over a percentage gradient. The unit’s included radio transmitter allows quick reductions of heating output to 25%, 50% or 75% while also offering the ability to adjust output up/down in increments of 1%.

Bromic Heating Wireless Master Remote

The Bromic Heating Wireless Master Remote offers complete comfort control and user-programmable customization to those wishing to implement our wireless control solutions on a grand scale. This radio transmitter can adjust an unlimited number of controllers in 6 groups from a single point within its 30m or 100ft range and is a must for larger venues.

ft
m2


5200 BTU

Heat Areas

Heat area dependent on ambient temperature and wind. Optimum conditions experienced at approx 15.5°C/ 60°F and in a low-wind, covered environment. Table layout indicative only.
Feedback
Name:
Email:
Phone:
State/Country:
Security Code:

captcha

User Group:
Application:
Feedback:
Free Quote
Name:
Email:
Phone:
State/Country:
Security Code:

captcha

User Group:
Product Interested In:
Application:
Enquiry: